Use the number in between those positions and record it. This is my third lock picking tutorial please check out my others including a brinks number lock and a mustang gt car door.
Additionally be sure to stop the rotation at the zero mark as well.
How to pick a master combination lock.
Learn how to easily pick a master lock model 175 in under 10 seconds.
Picking 206 master 4 wheel.
If you cant turn the dial at all from the zero point release the shackle and turn the dial cw just a number or 2 and then try it againstep 3 find the first sticking point.
Then cut a small strip of can that should measure about 3 5cm in width.
Turn the dial clockwise cw slowly as you press the shackle.
With some practice the 60 second number is attainable and do able.
In the case of a master lock we simply clear the lock.
How to pick a master padlock using a lock picking kit buy a lock picking kit for the best results.
Insert the bent end of your tension wrench into the lock opening.
Turn the locks dial clockwise to zerostep 2 apply pressure on the shackle which is the curved handle at the top of the padlock.
Push your rake tool as far into the lock as it will go.
We want this strip of tin to be cut into an m shape.
This method is for combination locks without false gates which are generally cheaper locks.
Step 1 turn the dial at least three rotations clockwise first just to make sure it is clear.
That is the first number of the combo code.
Again it will stop in between two positions in this case 5 and 6.
This method is best for learning how to pick a combination lock but it can also be implemented with other sorts of padlocks.
This is accomplished by rotating the dial at minimum three times past the zero mark in the clockwise right direction.
Figure out the last.
Apply just enough pressure to the u shaped part of the lock so that when you are rotating the dial it clicks in only one spot.
Take your can and cut off the two ends.
This will allow you to find out the combination to a lock with no combination and get into it very quickly.
As you turn the dial cw with.
Bobby keyz 947024 views.
Learn how to crack a combination lock in seconds with no tools.
The first step in picking any lock is to set a standard starting point.
Turn the tension wrench in the direction the key would go in.
Then pull and hold the shackle again and continue turning the dial.
20 decoding a dial combination master pad lock the fast and easy way duration.
Loosen the shackle a bit and turn the dial counterclockwise until you just pass the first group of numbers in this case 25.
No comments:
Post a Comment